Power-Pole MOVE PV Offshore Trolling Motor — 110" Shaft | Black | 24V/36V | GPS Anchor Lock
Power-Pole MOVE PV Offshore Trolling Motor — 110" Shaft | Black | 24V/36V | GPS Anchor Lock
Power-Pole MOVE PV Offshore — 110" Shaft | Black
The Power-Pole MOVE PV Offshore 110" is the ultimate Power-Pole trolling motor — the halo model of the entire MOVE lineup and the purpose-built solution for the largest offshore fishing boats operating in the most demanding bluewater conditions. This is not simply the longest shaft in the Offshore platform. It is the motor Power-Pole built for the boats and conditions that exceed what every other model in the lineup is designed for.
The 110" is the correct shaft when your bow-to-waterline measurement exceeds 62" with a typical fishing load. If your measurement falls between 52" and 62", the 96" Offshore is the right motor — the best all-around choice for most offshore anglers. The 110" is for the boats that exceed what the 96" is designed for.
→ MOVE PV vs. MOVE Offshore — Which Series Is Right for Your Boat? | Shaft Length Guide
The MOVE Lineup — Where the 110" Fits
| Model | Identity | Bow-to-Waterline |
|---|---|---|
| MOVE PV (36"–72") | Inshore and coastal excellence | Up to 42" |
| 84" Offshore | Introduction to the Offshore platform | 42–52" |
| 96" Offshore | Best all-around choice for most offshore anglers | 52–62" |
| 110" Offshore | The ultimate bluewater solution — halo model | 62"+ |
Who Actually Needs a 110" Trolling Motor
The 110" is not for every offshore angler — and that is by design. It is for a specific buyer: the owner of one of the largest offshore platforms with a bow-to-waterline measurement exceeding 62" who regularly fishes in demanding bluewater conditions where propeller depth, shaft rigidity, and GPS Anchor Lock reliability are non-negotiable.
If you are asking whether you need the 110", measure your bow-to-waterline with a typical fishing load. If the measurement is under 62", the 96" is the correct motor. If it exceeds 62", the 110" is the only shaft in the Offshore lineup that provides adequate propeller depth for your boat.
The 110" is ideal for:
- 36–45 ft offshore center consoles
- Large offshore catamarans
- Sportfishing boats and convertibles
- Tournament offshore fishing boats
- Commercial guide boats on large offshore platforms
- High-freeboard vessels with bow-to-waterline measurements exceeding 62"
Boats that typically require the 110" include:
- Yellowfin 36–42
- Contender 39–44
- Invincible 37–42
- SeaVee 390–450
- Regulator 41–45
- Jupiter 38–43
- Everglades 395–435
- Freeman 42–48 catamarans
- Large sportfishing convertibles and bluewater platforms with bow-to-waterline measurements exceeding 62"
Always confirm with a bow-to-waterline measurement. Hull design and rigging vary significantly — two boats of the same length can have very different bow heights depending on hull design, rigging, and load.
Why Choose the 110" Instead of the 96"
The 96" is the best all-around choice for most offshore anglers. The 110" is the correct choice when your boat, your bow height, and your fishing conditions exceed what the 96" is designed for. Specifically:
Your bow sits exceptionally high above the water. A bow-to-waterline measurement exceeding 62" means the 96" shaft does not provide adequate propeller depth in offshore swells. The 110" is the shaft that reaches the water on these boats — and keeps the prop submerged through the pitching cycle in real bluewater conditions.
You routinely fish in larger offshore swells. Bluewater conditions create pitching motion that repeatedly lifts the bow. At 110", the prop has the maximum depth buffer in the Offshore lineup to stay submerged through that cycle — maintaining thrust authority and GPS Anchor Lock performance in conditions where the 96" cannot.
You operate one of the largest center consoles or sportfishing boats. The structural loads on a trolling motor mount scale with hull weight, bow height, and shaft length. At 110" on a 38–45 ft offshore platform, those loads are at their maximum. The 110" is engineered for exactly that.
You want maximum propeller depth and steering control in demanding conditions. On very large hulls in bluewater conditions, the 110" delivers the propeller depth and shaft rigidity needed for precise GPS Anchor Lock performance over offshore wrecks, deep reefs, and bait schools in strong current and heavy chop.
Is the 110" too large for your boat? If your bow-to-waterline measurement is under 62", yes — the 96" is the correct motor. Using a 110" shaft on a boat that doesn't require it adds significant unnecessary weight and length without any performance benefit. Match the shaft to your boat.
Why the 110" Exists — The Engineering Reality
At 110", the engineering demands of the Offshore platform reach their maximum. Every challenge that exists at 84" and 96" is amplified at 110" — shaft flex, structural loads, propeller depth, and GPS Anchor Lock performance in real offshore conditions. Power-Pole built the 110" because the largest offshore boats in the most demanding conditions require engineering that no shorter shaft can deliver.
Very high bow mounting locations. The largest offshore center consoles and bluewater platforms are built with bow-to-waterline measurements that exceed 62". At that bow height, the 96" shaft does not provide adequate propeller depth. The 110" is the shaft that reaches the water on these boats.
Extreme offshore swells. Large offshore platforms in bluewater conditions experience significant pitching motion. A prop that is marginally submerged in calm water will break the surface repeatedly in bluewater swells — losing all thrust instantly every time it does. At 110", the prop has the maximum depth buffer in the Offshore lineup.
Maintaining propeller depth in pitching seas. GPS Anchor Lock performance is directly tied to propeller depth. A prop that stays submerged maintains thrust authority and holds position cleanly. At 110", the prop has the depth needed to stay submerged through the pitching cycle in the most demanding bluewater conditions.
Improved GPS anchoring when the bow rises and falls. On the largest offshore platforms in heavy seas, the bow rises and falls continuously. The 110" provides the depth buffer needed to maintain GPS Anchor Lock performance through that motion — holding position over a wreck, reef, or bait school when conditions are working against you.
Better steering authority on very large hulls. The brushless motor's dynamic horizontal thrust delivers precise steering authority on large offshore platforms. At 110", with the prop properly submerged, that authority is available in conditions where no shorter shaft can deliver the same performance.
The Offshore Engineering Story — At Maximum Scale
The MOVE PV Offshore shares the same brushless motor, GPS Anchor Lock system, C-Monster 2.0 ecosystem, and warranty as the standard MOVE PV. At 110", the engineering differences are at their most significant — the components that take the most stress in offshore conditions are working at the limits of the platform.
Carbon Fiber Reinforced Titanium Shaft
At 110", shaft deflection under load is the most significant engineering challenge in the Offshore lineup. A shaft that flexes at this length loses directional control, reduces GPS Anchor Lock precision, and places extreme stress on the mount and motor head. The carbon fiber reinforcement adds rigidity that controls an exceptionally long shaft under heavy loads — reducing deflection, maintaining propeller depth through bluewater swells, and withstanding the structural loads generated by the largest offshore boats in the most demanding conditions. At 110", this engineering is not optional. It is what makes the motor functional at this shaft length.
Heavy-Duty Offshore Mount
The forces generated by large offshore boats require a more robust mounting system than any inshore or coastal application. The Offshore HD mount is engineered for the structural demands at maximum scale — the repeated shock loading of bluewater wave action, the leverage generated by a 110" shaft, and the hull weight of a 38–45 ft offshore boat. The standard MOVE PV mount is designed for inshore and coastal applications. The Offshore mount at 110" is designed for the most demanding offshore conditions in the lineup.
Dynamic Horizontal Thrust
Maintaining position over offshore wrecks and reefs in wind and current requires both thrust and precise control. The brushless motor delivers dynamic horizontal thrust — precise, responsive power that maintains exact positioning over bluewater wrecks, deep reefs, bait schools, and offshore structure in strong current and heavy chop. At 110", with the prop properly submerged on the largest offshore platforms, that thrust and control are available in conditions where no shorter shaft can deliver the same performance.
Reinforced TechFlow Propeller
The Offshore TechFlow prop at 110" is working at the greatest depth and under the greatest stress in the Offshore lineup. The reinforced construction delivers better control in bluewater swells, maximum durability in open ocean saltwater, and consistent thrust in the most demanding conditions offshore anglers fish in.
Multi-Layer Corrosion Protection
Bluewater offshore environments are the most corrosive conditions a trolling motor will encounter. The MOVE PV Offshore incorporates multi-layer corrosion protection across all hardware and exposed components — engineered for boats that regularly operate far offshore in open ocean conditions.
Built for Bluewater
The 110" MOVE Offshore is built for anglers who fish the most demanding offshore conditions — bluewater, far offshore, in real sea conditions on the largest platforms. These are the scenarios this motor was engineered for:
- Gulf wreck fishing — precise positioning over deep structure in strong current on large offshore platforms
- Atlantic reef fishing — holding over deep offshore reefs in chop and current far from the inlet
- Tuna grounds — live bait fishing far offshore, holding over bait schools in heavy chop and wind
- Deep-water structure — GPS Anchor Lock performance over bluewater wrecks and offshore structure
- Offshore live bait fishing — positioning precisely over bait schools in open water in real sea conditions
- Extended runs in open water — anglers running 60–100+ miles offshore who need a trolling motor that performs as reliably at the end of the day as it did at the start
- Tournament offshore fishing — GPS Anchor Lock precision is critical when tournament results depend on holding position
- Charter and guide operations — commercial operations on the largest offshore platforms where reliability is non-negotiable
What's Included
- Offshore HD Quick Release Mount
- Wireless Information Display
- Two wireless hybrid remotes — control motor speed, heading, GPS Anchor Lock, and Power-Pole anchor deployment from anywhere on the boat
- Charging cradle
- RAM Tough-Claw mount
- One year of ProNav GPS navigation — Follow-a-Route, Heading Hold, Go To waypoints, route management
Warranty
- Lifetime warranty on the carbon fiber reinforced titanium shaft
- 3-year limited warranty on all remaining components
At this price point and for this application, warranty visibility matters. The lifetime shaft warranty and 3-year component warranty are among the strongest offerings in the offshore trolling motor category.
Key Specifications
- Shaft length: 110"
- Finish: Black
- Motor type: Brushless
- Shaft material: Carbon fiber reinforced titanium
- Voltage: 24V or 36V
- Thrust: 78 lbs (24V) / 100 lbs (36V)
- GPS system: GPS Anchor Lock (C-Monster 2.0)
- Mount type: Bow-mount (Offshore HD)
- Deploy type: Step-and-Stow
- Shaft warranty: Lifetime
- Component warranty: 3-year limited
The C-Monster Ecosystem
- Power-Pole App (iOS/Android, free) — motor control, device management, firmware updates, ProNav navigation
- ProNav GPS navigation — Follow-a-Route, Heading Hold, Go To waypoints, route management. Included free for one year.
- Two wireless hybrid remotes — control motor speed, heading, GPS Anchor Lock, and Power-Pole anchor deployment from anywhere on the boat
- CHARGE compatible — add Power-Pole CHARGE for real-time battery state-of-charge monitoring and automatic charge redistribution
→ C-Monster App, ProNav & CHARGE — The Complete Guide
36V Is Essential at 110"
For the 110" in offshore applications, 36V is strongly recommended — 100 lbs of thrust, maximum runtime on long offshore days, and the power reserve needed to hold position in strong current and heavy chop on the largest offshore platforms. Pair with an ABYSS 36V lithium battery:
Black or White?
Performance, specifications, and warranty coverage are identical across both finishes.
- Prefer white? → MOVE PV Offshore 110" | White
Shop the Full MOVE Offshore Lineup
- 84" | Black | 84" | White — Introduction to the Offshore platform
- 96" | Black | 96" | White — Best all-around choice for most offshore anglers
- 110" | Black (this product) | 110" | White — The ultimate bluewater solution
Need a shorter shaft? → Shop the standard MOVE PV lineup (36"–72")
Frequently Asked Questions
Who actually needs a 110" trolling motor?
Owners of large offshore platforms with bow-to-waterline measurements exceeding 62" who regularly fish in demanding bluewater conditions. Specifically: 36–45 ft offshore center consoles, large offshore catamarans, sportfishing boats, tournament offshore fishing boats, and commercial guide boats on large offshore platforms. If your bow-to-waterline measurement is under 62", the 96" Offshore is the correct motor.
Is the 110" too large for my boat?
If your bow-to-waterline measurement is under 62" with a typical fishing load, yes — the 96" Offshore is the correct motor. Using a 110" shaft on a boat that doesn't require it adds significant unnecessary weight and length without any performance benefit. Measure your bow-to-waterline and match the shaft to your boat.
How do I choose between the 96" and 110"?
Measure your bow-to-waterline with a typical fishing load. If the measurement falls between 52" and 62", the 96" is the correct shaft — the best all-around choice for most offshore anglers. If it exceeds 62", the 110" is the only shaft in the Offshore lineup that provides adequate propeller depth for your boat. When in doubt at the boundary, size up.
Does the 110" use the same GPS features as the other Offshore models?
Yes. GPS Anchor Lock (C-Monster 2.0), ProNav GPS navigation, and the full Power-Pole App ecosystem are identical across all Offshore models. The 110" delivers those features with the propeller depth needed to perform reliably on the largest offshore platforms in the most demanding conditions.
Is it compatible with Power-Pole anchors and CHARGE?
Yes. C-Monster 2.0 is built into every MOVE PV Offshore motor. When Power-Pole shallow-water anchors are connected, the wireless hybrid remotes control both the motor and the anchors from the same device. Add Power-Pole CHARGE for real-time battery state-of-charge monitoring and automatic charge redistribution.
What's included in the box?
Every MOVE PV Offshore 110" includes the Offshore HD Quick Release Mount, Wireless Information Display, two wireless hybrid remotes, charging cradle, RAM Tough-Claw mount, and one year of ProNav GPS navigation free.
Does the longer shaft affect performance?
On a boat that requires the 110", the longer shaft improves performance — it provides the propeller depth needed to stay submerged in offshore swells, maintain GPS Anchor Lock performance in pitching seas, and deliver thrust authority on the largest offshore platforms. On a boat that doesn't require it, the additional weight and length add no benefit. The 110" performs best when matched to the boat it was designed for.
Authorized Power-Pole Dealer. Expert support before and after your purchase. Free nationwide shipping.
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share
