Power-Pole MOVE PV Offshore Trolling Motor — 84" Shaft | Black | 24V/36V | GPS Anchor Lock
Power-Pole MOVE PV Offshore Trolling Motor — 84" Shaft | Black | 24V/36V | GPS Anchor Lock
Power-Pole MOVE PV Offshore — 84" Shaft | Black
The Power-Pole MOVE PV Offshore 84" is purpose-built for offshore center consoles and large saltwater fishing boats where standard trolling motors simply aren't designed to operate. This is not the next size up from the standard MOVE PV lineup. It is the entry point into an entirely different platform — engineered specifically for the bow heights, wave conditions, and structural demands of serious offshore fishing.
The 84" is the correct shaft when your bow-to-waterline measurement falls between 42" and 52" with a typical fishing load. If your measurement is under 42", the standard MOVE PV 72" is the right motor. If it exceeds 52", step up to the 96" Offshore.
→ MOVE PV vs. MOVE Offshore — Which Series Is Right for Your Boat? | Shaft Length Guide
The Offshore Platform Identity
| Model | Identity | Bow-to-Waterline |
|---|---|---|
| 84" | Entry into the Offshore platform | 42–52" |
| 96" | The all-around offshore model | 52–62" |
| 110" | Maximum offshore capability | 62"+ |
Why Offshore Anglers Need Longer Shafts
Offshore fishing creates conditions that standard trolling motors are not built for. Understanding why the Offshore platform exists starts with understanding what happens to a trolling motor on a large offshore boat in real sea conditions.
Higher bows. Large offshore center consoles — Yellowfin, Contender, Invincible, SeaVee, Regulator, Jupiter, Everglades, Freeman catamarans — are built with significantly more freeboard than inshore platforms. A bow-to-waterline measurement of 44–54" is common on a 30–34 ft offshore center console. The standard 72" shaft cannot reach the water effectively at that bow height.
Larger waves. Offshore swells and chop create a pitching motion that repeatedly lifts the bow. A prop that is marginally submerged in calm water will break the surface repeatedly in offshore conditions — losing all thrust instantly every time it does. The 84" provides the depth buffer needed to maintain propeller submersion through the pitching cycle.
Greater structural loads. Larger boats place substantially greater loads on a trolling motor mount because of increased hull weight, bow height, and wave action. The Offshore mounting system is engineered specifically for those conditions.
GPS Anchor Lock offshore. Holding position over an offshore reef, wreck, or bait school in current and chop requires consistent thrust authority. A prop that stays submerged delivers that. A prop that breaks the surface loses it. Shaft length is the variable that determines which one you get.
The Offshore Engineering Difference
The MOVE PV Offshore shares the same brushless motor, GPS Anchor Lock system, C-Monster 2.0 ecosystem, and warranty as the standard MOVE PV. The engineering differences are in the shaft and mount — the components that take the most stress in offshore conditions.
Carbon Fiber Reinforced Titanium Shaft
The standard MOVE PV uses an aerospace-grade titanium shaft. The Offshore series adds carbon fiber reinforcement to reduce flex on longer shaft lengths while maintaining the strength required for large offshore boats operating in rough seas. At 84", 96", and 110", shaft flex under load becomes a real engineering challenge. The carbon fiber reinforcement addresses it directly.
Heavy-Duty Offshore Mount
The Offshore mounting system is designed for the structural demands of large offshore platforms — greater hull weight, higher bow height, and the repeated shock loading of offshore wave action. The standard MOVE PV mount is engineered for inshore and coastal applications. The Offshore HD mount is engineered for what happens beyond the inlet.
Reinforced Prop
The Offshore prop is built to handle the additional stress of operating at greater depths and in heavier sea conditions. Offshore environments are harder on equipment. The Offshore prop is built accordingly.
72" MOVE PV vs. 84" MOVE Offshore — The Decision
| 72" MOVE PV | 84" MOVE Offshore | |
|---|---|---|
| Bow-to-waterline | 34–42" | 42–52" |
| Primary application | Large bay boats, coastal center consoles | Offshore center consoles, sportfishing boats |
| Primary environment | Nearshore, coastal chop | Offshore swells, open water |
| Shaft | Aerospace-grade titanium | Carbon fiber reinforced titanium |
| Mount | Standard HD mount | Offshore HD mount |
| Prop | Standard | Reinforced offshore prop |
| GPS Anchor Lock | Yes | Yes (identical) |
| C-Monster 2.0 | Yes | Yes (identical) |
| ProNav included | 1 year free | 1 year free (identical) |
| Thrust (36V) | 100 lbs | 100 lbs (identical) |
| Shaft warranty | Lifetime | Lifetime (identical) |
The rule at the boundary: When your bow-to-waterline measurement falls at 40–42" and you regularly fish offshore in real wave action, choose the 84". There is no performance penalty for a slightly longer shaft. There is a significant performance penalty for one that is too short.
Built for These Boats
The 84" MOVE Offshore is the correct motor for 28–34 ft offshore center consoles with bow-to-waterline measurements between 42" and 52". Boats in this category include:
- Yellowfin 28–32
- Contender 28–32
- Invincible 28–33
- SeaVee 290–320
- Regulator 28–31
- Jupiter 28–31
- Everglades 273–325
- Freeman 28–34 catamarans
- Similar offshore center consoles in the 28–34 ft range
Always confirm with a bow-to-waterline measurement. Hull design and rigging vary — two boats of the same length can have different bow heights.
Offshore Fishing Applications
The 84" MOVE Offshore is built for anglers who fish beyond the inlet in real offshore conditions:
- Offshore wreck fishing
- Reef fishing and bottom fishing
- Live bait fishing over offshore structure
- Pelagic fishing — tuna, mahi, wahoo
- Bluewater structure fishing
- Gulf and Atlantic offshore anglers
- Positioning over offshore bait schools in current and chop
Key Specifications
- Shaft length: 84"
- Finish: Black
- Motor type: Brushless
- Shaft material: Carbon fiber reinforced titanium
- Voltage: 24V or 36V
- Thrust: 78 lbs (24V) / 100 lbs (36V)
- GPS system: GPS Anchor Lock (C-Monster 2.0)
- Mount type: Bow-mount (Offshore HD)
- Deploy type: Step-and-Stow
- Shaft warranty: Lifetime
- Component warranty: 3-year limited
- Includes: Two wireless hybrid remotes, charging cradle, one year of ProNav GPS navigation
The C-Monster Ecosystem
Every MOVE PV Offshore motor ships with C-Monster 2.0 connectivity built in — the wireless platform that connects the trolling motor, Power-Pole shallow-water anchors, CHARGE battery management, and the Power-Pole App into a single unified system.
- Power-Pole App (iOS/Android, free) — motor control, device management, firmware updates, ProNav navigation
- ProNav GPS navigation — Follow-a-Route, Heading Hold, Go To waypoints, route management. Included free for one year.
- Two wireless hybrid remotes — control motor speed, heading, GPS Anchor Lock, and Power-Pole anchor deployment from anywhere on the boat
- CHARGE compatible — add Power-Pole CHARGE for real-time battery state-of-charge monitoring and automatic charge redistribution
→ C-Monster App, ProNav & CHARGE — The Complete Guide
36V Is the Right Choice Offshore
The MOVE PV Offshore runs on 24V or 36V. For offshore applications, 36V is strongly recommended — 100 lbs of thrust, maximum runtime on long offshore days, and the power reserve needed to hold position in current and chop. Pair with an ABYSS 36V lithium battery for accurate state-of-charge monitoring through CHARGE:
Black or White?
Performance, specifications, and warranty coverage are identical across both finishes. Choose based on your boat's aesthetic and equipment coordination.
- Prefer white? → MOVE PV Offshore 84" | White
Shop the Full MOVE Offshore Lineup
- 84" | Black (this product) | 84" | White — Entry into the Offshore platform
- 96" | Black | 96" | White — The all-around offshore model
- 110" | Black | 110" | White — Maximum offshore capability
Need a shorter shaft? → Shop the standard MOVE PV lineup (36"–72")
Frequently Asked Questions
Is 84" enough for my 30 ft center console?
It depends on your bow-to-waterline measurement, not your boat length. Measure from the top of the mounting surface to the waterline with a typical fishing load. If the measurement falls between 42" and 52", the 84" is the correct shaft. If it exceeds 52", step up to the 96". Two 30 ft center consoles can have very different bow heights depending on hull design and rigging.
When should I choose the 96" instead?
When your bow-to-waterline measurement exceeds 52" with a typical fishing load. The 96" covers 52–62" and is the all-around offshore model for larger center consoles and sportfishing boats. If you are at the boundary between 84" and 96", size up — there is no performance penalty for a slightly longer shaft.
What's different about the Offshore mount?
The Offshore HD mount is engineered for the structural demands of large offshore platforms — greater hull weight, higher bow height, and the repeated shock loading of offshore wave action. The standard MOVE PV mount is designed for inshore and coastal applications. The Offshore mount is designed for what happens beyond the inlet.
Why is the Offshore shaft reinforced?
At 84", 96", and 110", shaft flex under load becomes a real engineering challenge. The carbon fiber reinforcement reduces flex on longer shaft lengths while maintaining the strength required for large offshore boats operating in rough seas. The standard titanium shaft is appropriate for the 36"–72" range. The reinforced shaft is what the Offshore series requires.
Can I use the Offshore model inshore?
Yes — the motor will function inshore. However, if your bow-to-waterline measurement is under 42", the standard MOVE PV 72" is the correct motor. Using an 84" Offshore shaft on a boat that doesn't require it adds unnecessary weight and length without any performance benefit. Match the shaft to your boat.
Is the Offshore model compatible with CHARGE and ProNav?
Yes. CHARGE battery management and ProNav GPS navigation are fully compatible with the MOVE PV Offshore series. One year of ProNav is included free with every Offshore motor. CHARGE requires separate hardware installation.
Does the Offshore series include the same GPS navigation modes?
Yes. GPS Anchor Lock, Follow-a-Route, Heading Hold, Go To waypoints, and all ProNav navigation modes are identical across the standard MOVE PV and MOVE Offshore series. The GPS system is the same. The shaft length is what changes.
Authorized Power-Pole Dealer. Expert support before and after your purchase. Free nationwide shipping.
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share
