Power-Pole MOVE PV Offshore Trolling Motor — 96" Shaft | Black | 24V/36V | GPS Anchor Lock
Power-Pole MOVE PV Offshore Trolling Motor — 96" Shaft | Black | 24V/36V | GPS Anchor Lock
Power-Pole MOVE PV Offshore — 96" Shaft | Black
The Power-Pole MOVE PV Offshore 96" is the best all-around choice for the majority of serious offshore anglers. Designed for anglers who regularly fish offshore from large center consoles, the 96" provides the shaft length, propeller depth, and GPS control needed for demanding open-water conditions — without stepping up to the longest configuration in the lineup.
If the 84" is the entry into the Offshore platform and the 110" is the maximum, the 96" is the model most offshore anglers should buy. It covers the bow-to-waterline range of the widest range of serious offshore center consoles, delivers reliable GPS Anchor Lock performance in real offshore conditions, and is the shaft length Power-Pole built the Offshore platform around.
The 96" is the correct shaft when your bow-to-waterline measurement falls between 52" and 62" with a typical fishing load. If your measurement is under 52", the 84" Offshore is the right motor. If it exceeds 62", step up to the 110" Offshore.
→ MOVE PV vs. MOVE Offshore — Which Series Is Right for Your Boat? | Shaft Length Guide
The Offshore Hierarchy — Where the 96" Fits
| Model | Primary Positioning | Bow-to-Waterline |
|---|---|---|
| 84" | Introduction to the Offshore platform | 42–52" |
| 96" | Best all-around choice for most offshore anglers | 52–62" |
| 110" | Maximum shaft length for the largest offshore boats | 62"+ |
Why the 96" — Not the 84" or the 110"
The 96" occupies the center of the Offshore lineup for a specific reason: it covers the bow-to-waterline range of the majority of serious offshore center consoles — 32 to 38 ft boats with high freeboard built for open-water performance. These are the boats that regularly run to offshore reefs, wrecks, and bluewater structure in real sea conditions.
Why not the 84"? The 84" is the entry into the Offshore platform — the right motor for 28–34 ft center consoles with bow-to-waterline measurements between 42" and 52". On a larger offshore hull with a bow-to-waterline measurement of 54–62", the 84" does not provide adequate propeller depth in offshore swells. The prop breaks the surface in chop, losing thrust authority and GPS Anchor Lock performance at the moments when you need them most.
Why not the 110"? The 110" is the maximum shaft in the Offshore lineup — the right motor for the largest offshore platforms with bow-to-waterline measurements exceeding 62". For most 32–38 ft center consoles, the 110" is more shaft than the boat requires. The 96" provides the correct propeller depth without the additional weight and length of the maximum configuration.
The 96" is the answer when your bow-to-waterline measurement falls between 52" and 62" and you regularly fish offshore in real sea conditions. It is the shaft length that covers the most offshore anglers, the most offshore boats, and the most offshore conditions in the lineup.
Why the 96" Outperforms the 84" on Larger Offshore Boats
The difference between the 84" and the 96" is not simply 12 inches of shaft. It is the difference between a prop that stays submerged and one that doesn't — and that difference determines everything about offshore trolling motor performance.
Higher bow installations. A 34–38 ft offshore center console typically has a bow-to-waterline measurement of 54–62". At that bow height, the 84" shaft does not reach the water with adequate depth. The 96" does.
Increased freeboard. Larger offshore hulls are built with more freeboard for a reason — they need it to handle offshore sea conditions. That freeboard translates directly into bow height, and bow height determines the shaft length you need.
Greater pitch in offshore swells. Offshore swells create a pitching motion that repeatedly lifts the bow. A prop that is marginally submerged in calm water will break the surface repeatedly in offshore conditions — losing all thrust instantly every time it does. At 96", the prop has the depth buffer needed to stay submerged through the pitching cycle.
More reliable GPS anchoring. GPS Anchor Lock performance is directly tied to propeller depth. A prop that stays submerged maintains thrust authority and holds position cleanly. A prop that breaks the surface loses it. The 96" provides the depth the GPS system needs to perform reliably over offshore reefs, wrecks, and bait schools in current and chop.
Greater confidence in open water. On a long offshore day, running 30–60 miles from the inlet, you need a trolling motor that performs as reliably at the end of the day as it did at the start. The 96" is engineered for that kind of use.
The Offshore Engineering Story
The MOVE PV Offshore shares the same brushless motor, GPS Anchor Lock system, C-Monster 2.0 ecosystem, and warranty as the standard MOVE PV. The engineering differences are in the components that take the most stress in offshore conditions — and those differences matter more at 96" than at any shorter shaft length.
Carbon Fiber Reinforced Titanium Shaft
At 96", shaft flex under load is a significant engineering challenge. A shaft that flexes loses directional control, reduces GPS Anchor Lock precision, and places additional stress on the mount and motor head. The Offshore series adds carbon fiber reinforcement to the titanium shaft to reduce flex while maintaining the strength required for large offshore boats in rough seas. The result is a shaft that holds its line under load — critical for consistent performance at this length in real offshore conditions.
Heavy-Duty Offshore Mounting Hardware
Large offshore center consoles place substantially greater loads on a trolling motor mount — increased hull weight, higher bow height, and the repeated shock loading of offshore wave action. The Offshore HD mounting hardware is engineered specifically for those structural demands. The standard MOVE PV mount is designed for inshore and coastal applications. The Offshore mount is designed for what happens beyond the inlet, day after day, in real sea conditions.
Reinforced TechFlow Propeller
The Offshore TechFlow prop is built to handle the additional stress of operating at greater depths in heavier sea conditions. At 96", the prop is working harder and deeper than any standard MOVE PV configuration. The reinforced construction delivers better control in swell, improved durability in saltwater, and more consistent thrust in the conditions offshore anglers actually fish in.
Dynamic Horizontal Thrust
The brushless motor delivers dynamic horizontal thrust — precise, responsive power that translates directly into GPS Anchor Lock holding ability in current and chop. At 96", with the prop properly submerged on a large offshore platform, that thrust authority is what keeps you locked on structure when conditions are working against you.
Multi-Layer Corrosion Protection
Offshore saltwater environments are significantly more corrosive than inshore and coastal conditions. The MOVE PV Offshore incorporates multi-layer corrosion protection across all hardware and exposed components — engineered for boats that regularly operate in open ocean conditions, not just occasional saltwater exposure.
Built for These Boats
The 96" MOVE Offshore is the correct motor for 32–38 ft offshore center consoles, large deep-V fishing boats, offshore catamarans, charter vessels, and sportfishing boats with bow-to-waterline measurements between 52" and 62". Boats in this category include:
- Yellowfin 32–36
- Contender 33–39
- Invincible 33–37
- SeaVee 340–390
- Regulator 34–41
- Jupiter 33–38
- Everglades 340–395
- Freeman 37–42 catamarans
- Similar offshore center consoles and sportfishing boats in the 32–38 ft range
Always confirm with a bow-to-waterline measurement. Hull design and rigging vary — two boats of the same length can have significantly different bow heights.
Built for Serious Offshore Fishing
The 96" MOVE Offshore is built for anglers who fish beyond the inlet in real offshore conditions — not occasionally, but regularly:
- Offshore wrecks and artificial reefs
- Natural reef fishing over deep offshore structure
- Bottom fishing — positioning precisely over structure in current
- Live bait fishing — holding over bait schools in chop and current
- Open-water structure fishing
- Long offshore drifts — tuna, mahi, wahoo, sailfish, kingfish
- Gulf and Atlantic offshore anglers running 30–60+ miles
- Charter and guide operations on large offshore platforms
What's Included
- Offshore HD Quick Release Mount
- Wireless Information Display
- Two wireless hybrid remotes — control motor speed, heading, GPS Anchor Lock, and Power-Pole anchor deployment from anywhere on the boat
- Charging cradle
- RAM Tough-Claw mount
- One year of ProNav GPS navigation — Follow-a-Route, Heading Hold, Go To waypoints, route management
Warranty
- Lifetime warranty on the carbon fiber reinforced titanium shaft
- 3-year limited warranty on all remaining components
For buyers investing in a premium offshore trolling motor, this is one of the strongest warranty offerings in the category.
Key Specifications
- Shaft length: 96"
- Finish: Black
- Motor type: Brushless
- Shaft material: Carbon fiber reinforced titanium
- Voltage: 24V or 36V
- Thrust: 78 lbs (24V) / 100 lbs (36V)
- GPS system: GPS Anchor Lock (C-Monster 2.0)
- Mount type: Bow-mount (Offshore HD)
- Deploy type: Step-and-Stow
- Shaft warranty: Lifetime
- Component warranty: 3-year limited
The C-Monster Ecosystem
- Power-Pole App (iOS/Android, free) — motor control, device management, firmware updates, ProNav navigation
- ProNav GPS navigation — Follow-a-Route, Heading Hold, Go To waypoints, route management. Included free for one year.
- Two wireless hybrid remotes — control motor speed, heading, GPS Anchor Lock, and Power-Pole anchor deployment from anywhere on the boat
- CHARGE compatible — add Power-Pole CHARGE for real-time battery state-of-charge monitoring and automatic charge redistribution
→ C-Monster App, ProNav & CHARGE — The Complete Guide
36V Is the Right Choice Offshore
For offshore applications, 36V is strongly recommended — 100 lbs of thrust, maximum runtime on long offshore days, and the power reserve needed to hold position in current and chop. Pair with an ABYSS 36V lithium battery:
Black or White?
Performance, specifications, and warranty coverage are identical across both finishes.
- Prefer white? → MOVE PV Offshore 96" | White
Shop the Full MOVE Offshore Lineup
- 84" | Black | 84" | White — Introduction to the Offshore platform
- 96" | Black (this product) | 96" | White — Best all-around choice for most offshore anglers
- 110" | Black | 110" | White — Maximum shaft length for the largest offshore boats
Need a shorter shaft? → Shop the standard MOVE PV lineup (36"–72")
Frequently Asked Questions
Why choose the 96" over the 84"?
The 96" is the right choice when your bow-to-waterline measurement exceeds 52" with a typical fishing load. On a larger offshore hull with a bow-to-waterline measurement of 54–62", the 84" does not provide adequate propeller depth in offshore swells. The prop breaks the surface in chop, losing thrust authority and GPS Anchor Lock performance. The 96" provides the depth needed to stay submerged and perform reliably in those conditions.
Which boats need a 96" shaft?
32–38 ft offshore center consoles, large deep-V fishing boats, offshore catamarans, charter vessels, and sportfishing boats with bow-to-waterline measurements between 52" and 62". Boats in this range include Yellowfin 32–36, Contender 33–39, Invincible 33–37, SeaVee 340–390, Regulator 34–41, Jupiter 33–38, Everglades 340–395, and Freeman 37–42 catamarans. Always confirm with a bow-to-waterline measurement.
Is the 96" the best choice for a 32 ft center console?
It depends on your bow-to-waterline measurement, not your boat length. Measure from the top of the mounting surface to the waterline with a typical fishing load. If the measurement falls between 52" and 62", the 96" is the correct shaft. If it is under 52", the 84" Offshore is the right motor. Two 32 ft center consoles can have very different bow heights depending on hull design and rigging.
Can I use the 96" inshore?
Yes — the motor will function inshore. However, if your bow-to-waterline measurement is under 52", the 84" Offshore or the standard MOVE PV lineup is the correct choice. Using a 96" shaft on a boat that doesn't require it adds unnecessary weight and length without any performance benefit. Match the shaft to your boat.
What's included with the 96" MOVE Offshore?
Every MOVE PV Offshore 96" includes the Offshore HD Quick Release Mount, Wireless Information Display, two wireless hybrid remotes, charging cradle, RAM Tough-Claw mount, and one year of ProNav GPS navigation free.
Does it support ProNav?
Yes. One year of ProNav GPS navigation is included free. After year one, a subscription is required for ProNav navigation modes. GPS Anchor Lock remains fully functional without a ProNav subscription.
Is it compatible with Power-Pole anchors and C-Monster?
Yes. C-Monster 2.0 is built into every MOVE PV Offshore motor. When Power-Pole shallow-water anchors are connected, the wireless hybrid remotes control both the motor and the anchors from the same device — unified bow-to-stern control from one interface.
Authorized Power-Pole Dealer. Expert support before and after your purchase. Free nationwide shipping.
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share
